FLOMC
Request Information
Protection Materials
Hard-Coated Transparent Panels
A suitable hard-coated surface can improve resistance to scratching and abrasion. Specify the substrate, coating and finished panel together for the viewing conditions, fabrication and cleaning process.
- Surface wear requirements
- Defined optical requirements
- In-house coating line
Surface Durability for Clear Viewing
A suitable hard coating can improve resistance to surface scratching and abrasion. Temperature limits and mechanical performance depend on the substrate, coating and complete construction, which must also meet the project’s optical and protection requirements.
Define the
Complete Panel
- Substrate: select material and thickness for visibility, temperature and mechanical loads
- Coated area: agree the coated faces, coverage and clear viewing area
- Acceptance: define appearance, haze and abrasion test method and criteria
Address Surface Wear Early
Handling and cleaning can mark transparent surfaces over time. A suitable hard-coated construction can improve resistance to this wear when the coating, fabrication and maintenance process are considered together.
Plan Fabrication Around the Coating
Holes, cutouts, edge finishing, bending and bonding depend on the construction and process order. Coatings intended for flat sheet may not tolerate forming. Confirm these details before release.
Choose the Supply Form
Define the material, processed panel or agreed assembly in the quotation. Confirm the substrate, coating, fabrication route and acceptance criteria for the selected supply form.
Material Supply
Hard-Coated Material
Specify the substrate grade, thickness, coated faces and material dimensions. Confirm restrictions that affect fabrication or cleaning.
Request a QuotePanel Supply
Processed Panels
Define the finished outline, holes, cutouts, edge condition and clear viewing area. Processing methods and sequence depend on the substrate and coating.
Request a QuoteAssembly Scope
Agreed Assemblies
Where an assembly is required, define the panel, mounting arrangement, interfaces and supplied components in the agreed drawing and scope.
Request a QuoteSpecifications to Agree
Define requirements for the selected material, coating and finished construction. Use these inputs to prepare a drawing or enquiry.
Material, Coating and Optical Requirements
| Requirement | Input | Reference | Material | Processed Panel |
|---|---|---|---|---|
| Substrate & thickness | Grade and nominal thickness | Specification | Sheet or blank | Finished panel |
| Coated faces | Faces and coating coverage | Marked drawing | Identify coated side | Confirm coverage after processing |
| Clear viewing area | Position, size and appearance | Drawing and criteria | Defined clear area | View after mounting |
| Optical appearance | Haze and visual criteria | Agreed evaluation | Representative sample | Finished construction |
| Surface wear | Abrasion method and criteria | Test conditions | Selected coating | Finished surface |
| Exposure | Cleaning agents, contact time and temperature | Use and cleaning notes | Coating and substrate | Edges, bonds and mountings |
Fabrication and Supply Requirements
Confirm fabrication sequence, operating conditions and the agreed supply boundary.
| Supply Form | What to Send | Review Points | Scope |
|---|---|---|---|
| Material | Grade, thickness, coated faces and quantity | Fabrication restrictions | Agreed material dimensions |
| Processed panel | Outline, holes, cutouts and tolerances | Edges, forming, bonding and process order | Finished panel |
| Agreed assembly | Drawing, components and quantity | Mounting, cleaning and service access | Written assembly scope |
Hard coating does not make a panel scratch-proof or establish impact, cutting, laser or welding protection. Assess those requirements separately for the complete construction. Confirm temperature, mechanical loads and cleaning compatibility for the selected substrate and coating.
Have a Drawing or Material Requirement?
Discuss Requirements
Include dimensions, quantity, operating environment and cleaning method so the material and supply scope can be reviewed together.
Plan for the Finished Application
FLOMC operates its own coating line, connecting coating requirements with substrate selection and panel fabrication. For hard-coated panels, confirm the applicable coating system, process sequence and acceptance criteria for the selected construction.
Material Selection
Define the Environment
Define the substrate and thickness around visibility, temperature and mechanical loads.
Fabrication Review
Work from the Drawing
Resolve holes, cutouts, edges, forming and bonding against the construction and process order.
Cleaning Compatibility
Define the Cleaning Routine
Share cleaning agents, concentrations and contact conditions. Evaluate representative samples where compatibility needs confirmation.
Clear Supply Boundaries
Confirm the Scope
Agree drawings, quantity, supplied components and acceptance criteria before finalizing the scope.
Applications to Review
Consider hard-coated transparent panels where handling, wiping or surface wear affects a viewing surface. Suitability depends on the complete application.
Equipment Viewing Panels
For enclosure viewing areas where surface condition matters during routine use and maintenance. Confirm the substrate, mounting and required protection performance separately.
Inspection and Display Covers
For covers with defined appearance and cleaning requirements. Specify the clear area, haze criteria and cleaning-agent exposure. Follow the selected construction’s cleaning instructions; avoid abrasive tools and trapped grit.
Hard-Coated Material Questions
Review coating, fabrication and cleaning requirements for the complete construction.
Discuss Your Material
Does hard coating make a panel impact-proof?
No. Surface abrasion resistance and impact performance are different requirements. Assess the substrate, thickness, mounting and complete assembly for the actual hazard.
Can hard-coated panels be bent or machined?
Some constructions allow selected processes; others restrict them. Supply the drawing and forming requirements so coating compatibility and processing order can be reviewed.
Is alcohol safe for cleaning?
Not automatically. Compatibility depends on the coating, substrate, edges and exposure. Use only a cleaning method approved for the selected construction.
FINAL CTA
Start with Your Equipment Environment
FLOMC can support your project from material selection, surface performance, panel processing, and structural development to OEM integration and installed-site adaptation.
Share the equipment context, viewing requirement, protection concern, or existing structure you are working with. We can help define the next practical direction.
